)
AX-H Axial Fans
Medium pressure axial fan
Performance tested
Application
The AX-H provides effective extraction in operating temperatures up to 55°C continuously for various applications and in the event of fire at 200°C for 2 hours.
Performance
The fan can be configured to suit the individual operating point. Therefore, the pitch angle is adjusted in the factory. This provides a wide range of performance and high flexibility in the selection. A guide vane is available for higher pressure and efficiency.
Sturdy and dependable design
The casings are manufactured from heavy gauge steel with pre-drilled roll-formed flanges. Cases are hot-dip galvanized to AS1650 standard. A hot-dip galvanized steel casing ensure high quality and a long lifetime.
Flexibility
On request AX-H fans can be customized with the following options:
Wide range of accessories
Wide range of colours
Vertical installation
Improved life in C4 and C5 environments
Circular silencers selected with the fan
Improved IP rating
Upgraded motor options
Speed control
Tested according to ISO 5801 and AMCA 300
The AX-H axial fans have been performance tested in accordance with ISO 5801 and AMCA 300 standards.
Construction
The casing is made from hot-dip galvanised steel according to ISO 1461 with pre-drilled flanges. The terminal box with IP 65 is mounted outside on the casing.
Impeller
The impellers are made of aluminum and are dynamically balanced in accordance with ISO 21940-11, balancing quality G6,3, and vibration limits according to ISO 14694.
Motor
Standard models are driven by three-phase AC motors with efficiency IE3 suitable for 50Hz and optionally for 60Hz.
Motor protection
The motors are equipped with PTC thermistors for motor protection.
Control
Motors can be speed controlled by frequency inverter between 10 and 60 Hz.
Installation
The AXC fans can be installed in different positions indoor and outdoor (for more information see the manual).
Recommended accessories: flexible connections, vibration dampers, mounting feet.